Proprietary chemical formula dissolves harmful gum and varnish and removes sludge
Increases engine performance by cleaning rings, pistons, valves, and other close
tolerance parts
Chemically “tunes-up” the engine by loosening sticky valves, lifters and rings
Dispersants and detergents keep removed deposits in suspension until the motor
oil is drained
Improves engine efficiency and performance, extending the life of the vehicle
Problem
Engine deposits such as gum, varnish and sludge are
byproducts of normal operation and motor oils are designed
to suspend and remove these deposits. Many vehicles often
operate under ‘severe’ conditions, such as ‘stop and go driving’
that can increase these deposits and breakdown the ability of
the oil to counteract this situation. In addition, increased under
hood temperatures, reduced crankcase capacity, infrequent
oil changes will worsen the problem. As these deposit levels
build-up in the engine, the result is significantly reduced
performance and diminished fuel economy.
Solution
BARDAHL ALL-U-NEED!® Engine Tune-up™ is a concentrated
blend of solvents, dispersants, detergents and anti-wear additives
that will clean and condition the engine, by removing gum and
varnish deposits and preventing further deposit formation. The
ALL-U-NEED!® solution will chemically ‘tune-up’ an engine
by freeing-up stuck rings, removing deposits from valves, and
eliminating sludge from oil gullies and passages, so the engine
can operate with greater efficiency.
Use
Pour entire contents into the crankcase. Do not overfill. Run the engine at a fast idle for 20
to 30 minutes, then change the oil and filter. Or just add Engine Tune-Up™ to the engine
and it will work while driving, with best results normally achieved after 100 to 200 miles.
Dispose of any used or unused solution in accordance with the local, state and federal
regulations.
Field of application
Removes Gum, Varnish and Sludge to Improve Efficiency
and Extend the Life of the Engine
