DAB 132 is an extremely concentrated powerful additive. By eliminating the microorganisms that proliferate in contaminated diesel oils, DAB 132 prevents the deterioration of the fuel and the formation of deposits.
DAB 132 is an effective additive specifically formulated for the complete protection of diesel fuel against attack by microorganisms
Its action allows to prevent and block fermentation in the mass of liquid and to restore cisterns, tanks and pipes
DAB 132 acts very fast; his action is practically completed within 12 hours
DAB 132 it is suitable for the treatment of diesel fuel for automotive use, thanks to its complete compatibility with diesel engines.
DAB 132 has been shown to be particularly effective in the treatment of the following microorganisms:
the presence of water in the fuel
the use of biodiesel
the use of poor quality fuels or contaminated during their transfer from the refinery to the distribution station prolonged storage of fuel in a quiet state can promote the proliferation of microorganisms in the fuel and the consequent production and accumulation of sludge and corrosive acid substances inside the storage tank.
Subsequently, these deposits, entering into circulation in the fuel system, cause the clogging of the filters, the irregular flow of diesel to the injectors and the combustion chamber and the anomalous functioning of the engine or the heating boilers.
Its powerful active principle makes it particularly suitable for treating diesel oils subject to high proliferation of microorganisms.
By distributing itself in an optimal manner between the hydrocarbon and aqueous phase, it guarantees an effective action in the most contaminated points.
Thanks to its dispersing effect, it also reduces the aggregation of residual organic material by limiting the phenomena of accumulation of deposits and occlusion of the filters.
FIELD OF APPLICATION
Fuel storage areas
Storage for the supply of land and naval fleets
Tanks of vehicles that are parked seasonally or that have devices to prevent fuel splashing.
METHOD OF USE
Energetic treatment for contaminated fuel:
1 liter for every 10.000 liters of fuel.
1 liter for every 20.000 liters of fuel.
Do not exceed the maximum dose of 1 liter for every 5.000 liters of fuel.
To facilitate the mixing of the additive with the fuel, add Bardahl DAB 132 to the tank before refueling.
In case of water contamination, to obtain a more effective treatment, if possible, drain the water from the tank.
For a good action of the additive, after treatment, it is necessary to wait at least 24 hours before using the diesel fuel.
European production centre licensed by Bardahl Seattle since 1973.